Call us at : 09816280608
EXECUTIVE MBA
(POWER)
SEMESTER IV
YEAR: 2013 SESSION:
JULY
ASSIGNMENT – 2
FOR
Power Station
Management
(MDSP 831D)
(TO BE FILLED BY THE
STUDENT)
NAME: _______________________
SAP NO/REGN NO: _______________________
Section A (20 Marks)
Write short notes on any four of the following:
1. Renovation and
modernization of power station
Answer : Power Group is vastly experienced in Renovation
and modernization of both thermal
and hydel power plants. We are registered with Power Finance Corporation for
R&M of both thermal and hydel power plants.
RANGE OF SERVICES
·
RLA & LE Study and Report preparation
·
R&M/RM&U Study and Report preparation
·
Tender Document/ RFQ and RFP document for LROT
·
Bid Evaluation
·
Contract Document
·
Drawing Approval
·
Designers Supervision
·
Inspection & Expediting
·
Assistance during commissioning
EQUIPMENT AND SYSTEMS COVERED
Thermal Power Plant
2. Statutory Shut Downs
Answer : If something is
statutory, it is related to or set by laws or statutes. Statutory restrictions
on air pollution require drivers to have the emissions from their cars check
every few years.
You might wonder what the
difference is between statutory and legal. Both are adjectives and both are
concerned with the law. If something is legal, it is allowed by the law,
whereas if it is statutory, it is regulated by law. In the negative, this is easier
to
3. Role of budgetary
report in power station
Answer :
4. Turbine and its
Auxiliaries
Answer : Erection, testing and
commissioning of steam turbine and auxiliaries for Thermal, Captive &
Combined Cycle power plants up to 500 MW and Nuclear power plants up to 250 MW
capacity.
Electrical Candi Packages
Erection, testing and
commissioning of Electrical and C&I work for power plants & refineries
etc. including Calibration.
5. Substation
automation
Answer : There is an increased
focus on transmission and distribution investments to address aging and
distressed infrastructure. Previously voluntary reliability programs under the
North American Electric Reliability Council (NERC) are transitioning to
mandatory reliability standards, requiring self reporting and imposing
penalties for non- compliance. Utilities are placing a greater emphasis on real
time, enterprise wide information to secure the right information and the right
time to enhance reliability and to better manage asset management and operations
and management.
Intelligent electronic devices
(IEDs) being
Section B (30 marks)
(Attempt any three)
1. What do RLA Methods
based on Periodic Examination involve?
Answer :
2. State the
preliminary requirements for the preparation of Preventive Maintenance
Schedules.
Answer : The importance of
scheduled Preventative Maintenance is well recognised by Bytecraft and is a
fundamental part of all maintenance contracts, including our entertainment
industry clients.
Clearly, Preventative Maintenance
is directed towards two basic outcomes; good visual appearance and improved
reliability. It is with this in mind that we have continued to develop PM
strategies based on effectiveness rather than just a simple repetitive program.
The old school of Preventative
Maintenance dictates that all equipment should be touched twice a year, once a
month, 3 times a week etc. The fact is all equipment is not equal. By way of
example, preventative maintenance for a motor car
3. What are the
applications of a power automation system?
Answer : Power system automation is the act of
automatically controlling the power system via instrumentation and control
devices. Substation automation refers to using data from Intelligent electronic
devices (IED), control and automation capabilities within the substation, and
control commands from remote users to control power system devices.
Since full
substation automation
4. Which
are the major Thermal power Plants in India?
Answer : Thermal power is the "largest" source of power in India.There
are different types of Thermal power plants based on the fuel used to generate
the steam such as coal, gas, Diesel etc. About 75% of electricity consumed in
india are generated by Thermal power plants.
A thermal power plant is
generally a steam driven power plant. The force that spins the turbines in the
plant is steam that is either used to drive an electric generator or any other
work that requires power.
Call us at : 09816280608
No comments:
Post a Comment